Phantom Power
This mic requires phantom power, usually supplied by mixing consoles, recording hardware and live equipment if using an XLR to XLR cable or an external phantom power supply (not included). Use with the included XLR to 3.5mm cable on desktop and laptop computers if equipped with enough voltage at the 3.5mm jack. (Voltage on computers at the 3.5mm jack is usually 5 volts and is enough to power this condenser microphone).

Please Note: It cannot be used with mobile phones and tablets. It will NOT work if there is not enough phantom power voltage at the microphone input jack. Please check your model of computer to verify it has at least 5 volts at the 3.5mm microphone jack or 48v phantom power on your recording/mixing hardware.

Anti Vibration Shock Mount & Pop Filter
Includes shock mount to isolate the mic from nearby vibrations through a microphone stand. The pop filter / windscreen can be used to prevent wind noise, breath blasts and vocal plosives.

Specifications
Type: Pressure Gradient Condenser Mic
Polar Pattern: Cardioid / Uni-Directional
Frequency Response: 20 Hz-20 kHz
Sensitivity: -34dB±2dB (0dB=1V/Pa at 1 kHz)
Output Impedance: 150Ω ± 30% (at 1kHz)
Load Impedance: ≥1000Ω
Equivalent Noise Level: 16dBA
Max SPL: 130dB at 1 kHz ≤1% T.H.D.
S/N Ratio: 78dB
Power Requirement: 5-48V Phantom Power
Electrical Current 3mA
Microphone Net Weight: 7oz / 198g
Microphone Dimension: 1.8x5.9in / 46x150mm
Metal Finish: Silver/Chrome

Package Includes
Condenser Studio Microphone x 1
Shock Mount x 1
XLR to 3.5mm Cable x 1
Foam Windscreen x 1
User Manual x 1